Announcement

Collapse
No announcement yet.

De-Nickel Plating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Thanks Mike.

    Ken

    Comment


    • #17
      mike

      thanks, as soon i see its avaliable im gonna order some of the mx- ac



      bill
      http://home.comcast.net/~jhodges87/wsb/index.html

      Comment


      • #18
        ken,

        you use the same formula for steel and brass base metals, the b-929


        bill
        http://home.comcast.net/~jhodges87/wsb/index.html

        Comment


        • #19
          Nickel Deplating

          Bill,

          Yes, I use the B-929 for both brass and steel. I prefer to avoid the acid in the mix.

          Ken

          Comment


          • #20
            I have heard great things about this stuff however how long would several pounds last you if you strip Nickel a few times a week. Also lets say you make one gallon how long will that last in general with let say about 8 to 10 small parts? Does the bath need to be regenerated over and over again to keep it active?

            Comment


            • #21
              the instructions i recieved stated a 1 gallon make up has the abilty to strip 4-6 ounces of nickel which is a lot of nickel,mine has been mixed for around a week and a half and is still working fine.


              bill
              http://home.comcast.net/~jhodges87/wsb/index.html

              Comment


              • #22
                mike/lance

                have you looked into ordering this nickel stripper??


                bill
                http://home.comcast.net/~jhodges87/wsb/index.html

                Comment


                • #23
                  We now have this in stock at http://www.caswellplating.com/kits/metalx.html
                  --
                  Mike Caswell
                  Caswell Inc
                  http://www.caswellplating.com
                  Need Support? Visit our online support section at http://support.caswellplating.com

                  Comment


                  • #24
                    good to hear, im gonna order 5 pounds in about a week and i recommend this stuff highly it works plain and simple.


                    bill
                    http://home.comcast.net/~jhodges87/wsb/index.html

                    Comment


                    • #25
                      Hey, since this B-929 stuff has no acid do you suppose it would strip nickel off of zinc dicast without eating into the metal?

                      Comment


                      • #26
                        Nickel Stripper

                        My guess is yes, absolutely. However, it wouldn't do much good, since you definitely have to sandblast pot metal before doing much in the way of plating with it.

                        If you try it, do so on a small scrap piece. I could try it for you but my plating shop is in transit. Should be back up by Nov 1.

                        Kind regards,
                        Ken

                        Comment

                        Working...
                        X