Announcement

Collapse
No announcement yet.

Question on heat transfer on final part.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bhhodges
    replied
    i dont think the thin plating with hold in more heat to create more heat



    bill

    Leave a comment:


  • bhhodges
    replied
    here is a piece i just baked for 1/2 hour at 500 degrees .





    bill

    Leave a comment:


  • hellos
    replied
    Bump, Anyone have any ideas on this. I tried the search function but cound not come up with anything.

    Leave a comment:


  • hellos
    started a topic Question on heat transfer on final part.

    Question on heat transfer on final part.

    Hello, I am plating an intake manifold that sees temp of up to 250 deg. for a cust. He wanted to know if the plating would hold the heat into the part and cause higher temps. It is an aluminum manifold which will be copper, zinc,chromium plated. I don't think it will matter one bit, but he is worried. Thanks in advance for any help.
    -John
Working...
X