I have an aluminum radiator shell that I would like to nickel plate. It will need to have a couple of areas patched and deep pits and scratches filled first. The process that I have in mind is:
1 Patch the damaged areas using Techno-Weld.
2 Use Pit-Stop as a surface filler, like using body putty prior to painting a car body. Sand smooth such that only pits & scratches are filled.
3 Zincate & anode process nickel plating.
Will this method work?
Bill
Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!
We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register? Just click the Register Link above.
You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.