Announcement

Collapse
No announcement yet.

My rectifier died :(

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My rectifier died :(

    My rectifier died right in the middle of a plating job
    The fuse blew and was replaced. The machine runs but there is no voltage adjustment. When I disconnect everything I can get about 5 volts to show on the meter, no amps. When I connect it to the buss bars I get nothing. Its a 25amp rectifier with reverse polarity. I need a schematic. Can anybody help? I cant afford to purchase a new one right now and I have people waiting for finished work.

  • #2
    If you bought it from us, it's warrantied. Call us and we'll take care of it for you.

    If you didn't, I suggest you call the manufacturer and see if they can repair it and possibly ship you a replacement.

    In the meantime, you can use a battery and bulbs to control the power. See our tutorial at http://www.caswellplating.com/movies/
    --
    Mike Caswell
    Caswell Inc
    http://www.caswellplating.com
    Need Support? Visit our online support section at http://support.caswellplating.com

    Comment

    Working...
    X