No announcement yet.

flash copper questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • flash copper questions

    I am having some trouble plating potmetal and I am trying to sort out what is going wrong and I have a few questons.
    Is it ok to use the titanium heaters in the bath
    My parts are coming out a dark dull color and the flash copper is blistering off the parts with poor adhesion. I am not using the bandages, tank is at 110 F,heating with the titanium heater, deoxidizing with pickle4 I am wondering if I have contaminted the tank and should I try to plate it out with a dummy? and what sould I use as the dummy plate
    Any suggestions would be apreciated Thanks Bob