Announcement

Collapse
No announcement yet.

Plating Diecast

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mcaswell
    replied
    We have a new Die Cast kit especially for plating models.

    Leave a comment:


  • mcaswell
    replied
    Re: Plating Diecast

    Plating die cast (or Pot Metal) can be tricky, but we've come up with a few products to help you.

    All polishing should be done prior to plating. Plate the die cast with our Flash Copper Kit.

    After plating with the primer kit, the part will be copper plated. Polish again, then you may plate with brass-gold etc. See our kits page for info on other plating products we supply.

    Good luck!

    Leave a comment:


  • Airgrp
    started a topic Plating Diecast

    Plating Diecast

    Interested in attempting to plate (brass/gold/copper) to Diecast (small scale) car bodies, such as \"hotwheels\" Is this possible? What specific kits/steps would be needed to do so? If so, would these pieces then need to be polished following plating? I am VERY new at this, Thanks to all who can help.
    Airgrp
Working...
X