Announcement

Collapse
No announcement yet.

Gun Barrel Polish

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mikie2332
    replied
    don't you see the scraches left by the sand paper

    Leave a comment:


  • skiddz
    replied
    I've sanded decorative copper up to 2000 grit before and it comes out *almost* looking polished.

    Wonder if the >$20 for a wheel (or two) some compound and an arbor might be worth it....

    Leave a comment:


  • bhhodges
    replied
    i dont know of a way to get a mirror finish without a buffing wheel and i also havent ever sanded past 600 grit so i dont know if you would get the result your looking for this way either. what is the highest grit of paper you used



    bill

    Leave a comment:


  • Rouge
    replied
    Is it possible to get a mirror finish without using a polishing wheel is so how. thanks

    Leave a comment:


  • bhhodges
    replied
    probably because you used a wire wheel on it and didnt sand it enough.



    bill

    Leave a comment:


  • Rouge
    started a topic Gun Barrel Polish

    Gun Barrel Polish

    I recently scratched the blued barrel of one of my new guns, so I tried to polish this out by hand using wet and dry and wire wool. But whenever I apply some cold bluing it feels very rough. Why?
Working...
X