Announcement

Collapse
No announcement yet.

lower rpm !!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • customandsound
    Guest replied
    i sure hope baldor is more understanding .. i know my customer and lance were .. after looking at it better it broke right at the weld .. mangling my customers part's but that is what insurance is for

    Leave a comment:


  • customandsound
    Guest started a topic lower rpm !!!!!!

    lower rpm !!!!!!

    today after i had equipment failure i had to pull out a old motor i had laying around ,, it is a 3/4 hp but with 1750 rpm after my trip to home depot to buy some wiring stuff .. i got it up and running .. but what i have seen is that with the lower rpm i still run a 8" buff the part has less scratches .. and it run's cooler .. as to where i was running my 3450 rpm machine it was getting down quicker but i had more marks ... well this is what happen to the top of my stand ..


    and all i can say is the machine is shot it bent the shaft on the left side


    I will toss up some pic of the part's done with the higher rpm and the lower rpm so yens can see what i am talking about
Working...
X