Announcement

Collapse
No announcement yet.

Pot Metal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mcaswell
    replied
    Re: Pot Metal

    You were right to put the in your post; restoring Pot Metal can be a real problem.

    The best thing you could do is to drill out the holes in your part to ensure there is no corrosion left, then fill them using a Solder Paste - http://www.caswellplating.com/solderit.htm

    Then plate the part with our Pot Metal Primer - http://www.caswellplating.com/alzinc.htm

    You can then copper, nickel and chrome as normal.

    Leave a comment:


  • harold
    started a topic Pot Metal

    Pot Metal

    We have a taillight bezel off an antique Studebaker made of pot metal. What is the easiest way to get the potholes out of these pieces so I can re-chrome them?
Working...
X