Announcement

Collapse
No announcement yet.

mirror polishish on copper

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mnt mike
    replied
    Re: mirror polishish on copper

    I am not refering to deep scatches, but the haze left by even the sofest buffs I\'ve used. I can achive a nice mirror finish but when held at an angle the marks left by the buff are quite evident. Thanks

    Leave a comment:


  • mcaswell
    replied
    Re: mirror polishish on copper

    Have you tried a spiral sewn cotton buff with tripoli?

    If there are scratches in your part, you need a compound with some abrasive to cut the scratches out.

    Rouges don\'t have abrasive, so won\'t remove scratches.

    Leave a comment:


  • mnt mike
    started a topic mirror polishish on copper

    mirror polishish on copper

    I have been polishing copper plate to a mirror finish and I can achive a very high pollish. I use tripoli on a loose flanel buff and fabuluster as an intermeadiate finishing with jewlers rouge all with 6\" flanel buffs. As light as my touch is in the final polish I can\'t get rid of or reduce the fine scrtaches left by the final prosses. Is there a softer buff or method to remove these sratches? I have most recently been experimenting hand buffing with a leather shamy streched over a board board with rouge.
Working...
X