What will cut this faster?

[mcaswell]

Yes, that will work too.

FeltBobs - http://www.caswellplating.com/feltbobs.htm
Greasless - http://www.caswellplating.com/buffing.htm

[saiyan7]

caswell has a felt bob kit which you can use with your dremel and some greaseless compounds. They will be even faster that the paper.
Good Luck!

[fosgate99]

ok great! I will order some up right away! What do i use for the recessed area once i rid the piece of the casting marks? I had mentioned the dremel but If the dremel is what i need to use won't if give me a different final finish? What i mean is i am using the wheel on the most of the piece and in that particular area the wheel won't fit.

[mcaswell]

Cutting Faster

You need to use Wet and Dry Paper to remove the casting marks. See http://www.caswellplating.com/wetanddry.htm

Once the casting marks are gone, move on with the black compound.

[fosgate99]

I am polishing my turbo housing on my truck. As you can see in the picture the housing is really rough. I am using an 8" spiral sewn cloth wheel and the black compund spining at 3150rpm's. That little bit that is shiny took me like a 1/2 hour. There must be something better. Also what can i use to get in the area that is recessed around the intake part of it? I have not used the dremel. Will that be my tool? Anyway what can be used to spped this up?