Announcement

Collapse
No announcement yet.

A few polishing questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    mcaswell
    ******* Inc Founder

  • mcaswell
    replied
    1. I don't really understand the question. Once the buffing wheel gets matted with compound, use the rake.

    2. No.

    3. Buff it with a clean buff. Yes, this is too much compound.

    4. Sure, you could powder coat it.

    Leave a comment:

  • scimitartoo
    New User

  • scimitartoo
    started a topic A few polishing questions

    A few polishing questions

    Thanks for hosting this forum. A couple questions if I may.

    1. In specific terms such as square inches, how often to rake the buff, assuming compound is applied at a reasonable rate? Is it helpful to occasionally run a cloth rag across the buff to remove accumulated compound?
    2. Should one ever wash the buffing wheels?
    3. If there is that black residue on the piece, how best to remove it? And am I right that it means too much compound?
    4. Finally, regarding the VHT clear coat, is chipping or flaking a concern? Could you powder coat with clear after polishing? It seems that a clear powder coat would be the best option.

    Thanks, Ken
Working...
X