Announcement

Collapse
No announcement yet.

pc shocks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 99blackbird
    replied
    thank a lot.

    Leave a comment:


  • non-stick
    replied
    negative. Chambers will pressurize due to the heat involved and thus compromise the seals. That's strictly a wet-paint application or a plating thing "maybe". Any and all finishing work done on the shocks or strut cratridges are done prior to pressurization from the factory. Sorry... as stated before, powder coating *does* have it's limitations.... Russ

    Leave a comment:


  • tomg552001
    replied
    Chances are, the high temperatures will damage any seals etc, thus ruining the shocks. I wouldnt suggest them unless they are the rebuildable type that you can disassemble.

    Leave a comment:


  • 99blackbird
    started a topic pc shocks

    pc shocks

    i want to ask a stupid question. is it possible to pc gas shocks or will they explode when you add heat to them. just wondering.
Working...
X