I was following a guide on building a powder coating oven which led me to this site. Here is the link to the guide.... http://www.powdercoatguide.com/2014/...l#.VlJ20OJwzCV
In the part 2 series of this build, it tells me to buy these items below for the control box.
Metal Electrical Box
Auber SYL-2342 PID Controller
Sestos B2E 110-220v Timer (upper left hand corner)
4 Green Buttons
2 Red Lighted Buzzers
4 Toggle Switches
It also tells me to come to this site, to find out how to wire all of these items together into the control box along with the heating elements. However, the link for this site no longer works.
Here is that link.... http://forum.caswellplating.com/oven-building-forum/11558-oven-controls-build.html
Is there anyone here who can point me in the right direction on a wiring diagram, which explains how to wire this oven up or how to wire this oven up?
I have everything else done with this oven except the control box. All the heating elements are in and the wires are all ran for the elements and the blower.
Thank you all very much for your time and have a great day.