-
I don't see any major issues with a TGIC. However... if it were me, I'd use an epoxy with a clear topcoat just for the chip resistance. Just my .02 -
Powder Choice for Calipers and Rotors!
Will TGIC powder withstand Rotors and Calipers? I want to do my Rotors to avoid that rusted look they always end up with but want to know which powder type to use that withstand the heat. Yes, I will be masking off the Pad contact area. :P
Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!
We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register? Just click the Register Link above.
You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.
Leave a comment: