Announcement

Collapse
No announcement yet.

masking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WAORacing
    replied
    Originally posted by Noob2PC
    Originally posted by Wkillgs
    Aluminum foil works well for masking if you don't need a sharp edge.....
    What about using Tape for the edges and foil for a filler like if you need a large space not coats like say the Pad contact space on a Brake Rotor? Use the tape for the edge and to hold the foil down.

    That is what i do!! it works very well like that and you dont use as much tape. Which is a +.

    Leave a comment:


  • Noob2PC
    replied
    Originally posted by Wkillgs
    Aluminum foil works well for masking if you don't need a sharp edge.....
    What about using Tape for the edges and foil for a filler like if you need a large space not coats like say the Pad contact space on a Brake Rotor? Use the tape for the edge and to hold the foil down.

    Leave a comment:


  • Blademan
    replied
    coolllll thanks once again guys....

    Leave a comment:


  • Wkillgs
    replied
    Aluminum foil works well for masking if you don't need a sharp edge.....

    Leave a comment:


  • Blademan
    replied
    Thanks...I was sorta tryin to look for the cheap way out.....never fails for me..it's always the high road.....think I would have learned that and belived it when my twin girls were born 15 years ago...thanks again..

    Leave a comment:


  • bzer1
    replied
    I had the same question. I was told that it would work in an oven but not for radiant heating. The only problem is that even the high heat silicone sealers give off fumes when heated in an oven, that might have an effect on the color. 3M makes several high heat masking liquids. Getting your hands on them is tricky because they're industrial grade and toxic. I would get all the different size tapes and a really good exacto knife set and practice,practice,practice.

    Leave a comment:


  • Blademan
    started a topic masking

    masking

    Will something like the permatex hi temp silicon work for masking?
Working...
X