Announcement

Collapse
No announcement yet.

thin metals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mkminoia
    replied
    You might try a lower temp for a longer duration. The powder will flow out a little slower. If you are masking off the back anyway, try laying it flat in your oven.

    Leave a comment:


  • Blademan
    started a topic thin metals

    thin metals

    is there a special trick to coating thin metal? Like a spinner blade used in fishing? the problem I'm having is that after the oven look like they were barly coated and have a 1/4 moon crescent of paint on the bottom .
    thanks....
Working...
X