Dust problem

[buzzurd]

Having a real dust problem in my shop.You can actually see the dust in the air being attracted to the part while spraying.Any great solutions out there for this problem?Oh and one more thing.NEVER try spraying alittle more powder on a part while curing thinking it will melt and blend in.It absolutely will not and you will be doing some stripping.

[jtagger19]

a spray booth helps a lot in a non ventilated area ( wear a good mask )

NEVER try spraying alittle more powder on a part while curing thinking it will melt and blend in.It absolutely will not and you will be doing some stripping.

you can do it up to the time when the powder starts to melt and looks matte ( no gloss) , once it gets melted ( looks completly wet and glossy ) you can't but still if you do it you can coat it with high gloss clear to fix it.
this happens a lot when doing fades