Tweet
I have a PC unit from Chicago Electric. The air trigger will not release right away, and it will continue to blow powder for a few seconds after i release the trigger. I thought i was running too little air pressure but that doesnt seem to be the case, Im at 20psi.. I took it appart and cleaned it.. but still does it.. its drivin me mad... has any one else had this problem?
-
If it jams; Force it. And if it breaks it needed replacing anyway.
I can go from 0 to "What seems to be the problem Officer?" in 3 seconds." -
Yup had the same gun, Have to love Harbor Freight
but there is a fix,
take the trigger apart again and on the STEM of the trigger apply a little grease NOT ON THE WASHERput back together and leave the packing nut a little loose.. Cured mine..Jim Shuster
www.backyardpowdercoating.com Sold.....
www.chrissys68mustang.com Hobbie
www.photogserver.net Web Hosting. -
I used Silicon spray to fix mine.Comment
-
8-10psi will work fineComment
-
Had the same trouble, was very annoying having to undo the air every time you layed the gun down. Took it apart and lubed it a few times. Finally ended up taking it back.Comment
-
Same deal here.... I havent had time to take it apart to lube it up, so I just keep a pair of needle nose pliers to pull the thing out when finished spraying... Besides, I'm married so no vasilene around the house
Comment
-
hvac36... Thanks.. that did the trick, i used tri-flo and left the nut just a bit loose...If it jams; Force it. And if it breaks it needed replacing anyway.
I can go from 0 to "What seems to be the problem Officer?" in 3 seconds."Comment
-
Your welcome.. Glad it worked..Jim Shuster
www.backyardpowdercoating.com Sold.....
www.chrissys68mustang.com Hobbie
www.photogserver.net Web Hosting.Comment
Comment