-
Guest repliedthe best way to learn is by doing ... i wasted alot of powder in the first few trys and after a while you will get it right . it is mostly hit or miss.... good luck -
I'm going way out on a limb here and venturing a guess...instructions?
Kidding aside it has some useful guide lines to get you started with good results.Remember though that the things in the manual and here on the forum are suggestions or guides to get you in the ball park.Every oven,booth,prep and operator has different factors that effect the outcome. So-- the manual and forum get you close and then you fine tune your specific process.There are some nice troubleshooting tips to help prevent you from removing your hair one handful at a time.
Leave a comment:
Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!
We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register? Just click the Register Link above.
You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.
Leave a comment: