Help With Applying Tinted Brass

[CaptainChauncy Amateur Metal Finisher Find all posts View Profile Close CaptainChauncy]

I tried to apply tinted brass over near chrome yesterday and had no luck. Very little powder would come out of the gun and then too much powder would come out. It was only with this color that I had this problem. Does anyone know what the problem might be? I tried the 5 other colors that I ordered and those were all excellent!

[warchild Amateur Metal Finisher Find all posts View Profile Close warchild]

Is your other colors a translucent color. it may just be that one. I seem to have just a little problem only with the translucnet gold. it comes out like that on most of my things. just the gold the other anodize colors come out fine. maybe that brass is like the gold one.

[CaptainChauncy Amateur Metal Finisher Find all posts View Profile Close CaptainChauncy]

Yes, this problem is only with the tinted brass. I tried lollypop purple and that was very easy to apply and came out great!

[Blademan Experienced Metal Finisher Find all posts View Profile Close Blademan]

I found out with yhe brass I hade to really do some fine tuning with the air flow, I also really fluffed up the powder befor shooting it..