Announcement

Collapse
No announcement yet.

Black Wrinkle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jagboy69
    replied
    Thankyou for the advice. I'll get an order out asap.

    Leave a comment:


  • warchild
    replied
    This is Caswell's Black Wrinkle powder.
    I cured it at 375 for 15min.
    When I did it at 400deg. the powder would turn to a gloss black with no wrinkle to it at all.

    Some of this Black wrinkle powder is over 2 years old and still works like the newer Black wrinkle that I have.

    Leave a comment:


  • jagboy69
    replied
    Who is the proud owner of this crinkle job Who's powder did you use? Temps and cure times I have some crinkle I need to do myself.
    http://www.caswellplating.com/bbs/al...php?pic_id=478

    Leave a comment:


  • warchild
    replied
    I striped off the coat and powder coated it with 1 coat only, now it looks good. So I guess you don't put 2 coats of Black Wrinkle on any thing.

    I put a pic of it in the Album if anyone wants to see it. I put one pic in there 2 times

    Leave a comment:


  • warchild
    started a topic Black Wrinkle

    Black Wrinkle

    I put Black Wrinkle on a part and it looked fine but I saw a place were the powder didn't get on to good so I powder coated it a 2nd time and when it came out the oven it had just about no wrinkle to it and looked like gloss black. What happend to it here. I know it was cured. I cure the wrinkle at 375deg. all the time. but when I saw the 2nd coat come out like this I put it back in the oven and went to 400deg and nothing changed. still looked the same. Did I get it to hot? or 2 coats of black wrinkle cause this to happend?
Working...
X