DIY fluidized bed?

[Motorhead]

Fluidized Hopper

I use this hopper to supply my Nordson gun (multiple hoppers for color changes), but have also used it as a fluidized hopper. I run a water filter before my paint air system and a low pressure regulator before the fluidizing hopper. I run 5 to 7 psi on average. Preheat temperature determines paint thickness (hotter = thicker). Hopes this helps.


Gary

[Bernert]

http://www.pcfpowder.com/doit.html

Is that what you're looking for?

Thanks.

[Bernert]

Re: Fluidized Hopper

Check out item 7508784520 on Ebay. This has a 6" ID, which should be ok for small parts.

Gary

Can I run those off any compressor with a moisture trap and regulator?

[Motorhead]

Fluidized Hopper

Check out item 7508784520 on Ebay. This has a 6" ID, which should be ok for small parts.

Gary

[Popeye]

http://www.pcfpowder.com/doit.html

Is that what you're looking for?

[Bernert]

I am going to be coating a bunch of small parts for a hotrod project in one color and was wondering if anyone had suggestions or plans for building a small fluidized bed.

Any input is appriciated.