Announcement

Collapse
No announcement yet.

Creating my set up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Creating my set up

    I have a few basic questions about my set up


    I was going to pick up an eletric ovan and use that, is that the best idea for a beginner? I dont want to do any thing bigger than a rim. I have hear alot about people making there own ovens is this a better idea?

    Thanks for the help

    Rob
    Post edited due to violation of the Terms

  • #2
    I picked up a used double oven from a remodel for free.. works great, and i can get a 17" bike wheel in it too... i preheat in the bottom and cure in the top, if i have 2 wheels to do, after i pre heat the second wheel.. i crank up the heat in the bottom and cure in the bottom.
    If it jams; Force it. And if it breaks it needed replacing anyway.

    I can go from 0 to "What seems to be the problem Officer?" in 3 seconds."

    Comment


    • #3
      RE: Creating my set up

      Hey Spie:
      An old household electric oven will be just fine.
      Good Luck
      Bob
      www.capecodpowdercoating.com

      Comment


      • #4

        http://jagboy69.com/powder_coating.htm

        Comment

        Working...
        X