Announcement

Collapse
No announcement yet.

Peeling off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Noob2PC
    replied
    Originally posted by jtagger19
    sounds like under cure ,
    I have found that if stripping under cured powder with aircraft it melts like liquid , if it strips like rubber it was cured .
    I have be told that you can fix under cure powder by repeating the cure process.
    but I haven't tried yet.
    thanks, that is what I though. Well it is installed and running, I am not pulling it just to heat it again! Im gonna drive it now.

    It was early and I have learned a lot since then.

    Leave a comment:


  • jtagger19
    replied
    sounds like under cure ,
    I have found that if stripping under cured powder with aircraft it melts like liquid , if it strips like rubber it was cured .
    I have be told that you can fix under cure powder by repeating the cure process.
    but I haven't tried yet.

    Leave a comment:


  • Noob2PC
    started a topic Peeling off

    Peeling off

    I did some parts that were assemebled. Yeah I know!, but anyhow. I had to seperate them the PC is peeling off. If I try I believe I could peel the entire part and end up with a Skin. Did I under cure the parts? It was one of the first parts I did and not sure if I let them get to temp.
Working...
X