Announcement

Collapse
No announcement yet.

My First PC experience

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • customandsound
    Guest replied
    yes you can and yes it dose

    Leave a comment:


  • OKTRX450R
    replied
    Awesome...great job. I hope my first experience turns out as good.

    Can you just preheat the part and then spray the clear on? Will it stick to already cured powder?

    Leave a comment:


  • wamontgomery
    replied
    Both the items look good, good job!

    Leave a comment:


  • customandsound
    Guest replied
    the clear added depth to the part you will like the out come of it ..

    Leave a comment:


  • sdold
    replied
    It's a pretty cheap porch light, so I think it's just plated. It's soldered together. I was wondering if the solder would melt in the oven, but it didn't.

    I have some clear, I think I'll try that. I've never done anything with a clear topcoat before.

    Leave a comment:


  • customandsound
    Guest replied
    is is a brass or just plate.. ?

    But i heat all parts to around 150f and shoot this will make the powder stick and cover better...

    oh sdold No hard feelings....

    when i use a clear i put the part out of the over and shoot right on the hot part .it will let the powder flow in to the cracks and hard to reach places then i cure for 10 minutes and pull then let dry...

    as with powder coating to make that hard work glow .. i will wax it with carnuba wax and package it up waiting for the owner to pick it up..
    not one of my parts leave my shop unwrapped ..the customers like it when you go the extra mile for them

    Leave a comment:


  • sdold
    replied
    Thanks Chuck.

    I've been meaning to try heating up a part to about 200, then shooting powder into the corners without the voltage turned on. This should eliminate the Faraday Cage effect, shouldn't it? Anyone tried this?

    Leave a comment:


  • customandsound
    Guest replied
    i can show you all kinds of part i did miss a spot on...
    i had to reshoot the part to get it

    the rack sytems will do things to the part

    other than that I would hang it on my house good job...

    Leave a comment:


  • sdold
    replied
    When the pieces were apart hanging on the rack, I didn't coat the backside of that piece. I forgot that the underside was visible.

    Leave a comment:


  • LeeParsons
    replied
    Good eye Chuck. Any advise on getting coverage in an area like that without getting to heavy on the adjacent part?

    Leave a comment:


  • customandsound
    Guest replied
    i want to point out the miss on the under belly of the lamp....

    Leave a comment:


  • Netnut
    replied
    What color did you use on the dog? My black poppy tok the flat white easily?

    Leave a comment:


  • LeeParsons
    replied
    Cats are much easier to powder but they don't like the curing process either......

    Leave a comment:


  • fxstcguy98
    replied
    I just tried to powder coat my dog.....he was not happy.

    Leave a comment:


  • Popeye
    replied
    Good job, they both look real nice.
    You should be able to do a sink as long as its stainless steel or cast iron... I think you guys might be on to something there, just might be a good market.

    Leave a comment:

Working...
X