Announcement

Collapse
No announcement yet.

New here.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New here.

    Just checking in. A friend of mine who does chrome plating told me about this place. I have a hobby set up and an oven in my backyard. Still gotta get a shop built, looking for inexpensive oven options. Mostly doing my own stuff, may branch out if I can get it right.

  • #2
    welcome to the forum, there are a few post dealing with ovens if you search for it in the pc board.
    when in doubt polish it out/ why replace it when you can refinish it
    G2 Polishing and Powdercoating

    Comment


    • #3
      Welcome,

      You have several options on ovens, you could use an old kitchen oven if you doing parts small enough to fit in one, the nice part about that is you can get them cheap or free. You can also build an oven if you need something larger, you just need to decide what size you need then research your options from there.
      Lee Parsons
      Rowlett, TX (East Dallas)

      Comment


      • #4
        Welcome around ...
        AS for a oven take a look at this post :
        http://www.caswellplating.com/bbs/viewtopic.php?t=3993

        I am refining abunch of stuff to help the new and to improve the old..

        good luck

        Comment


        • #5
          Thanks for the welcome. I'll be asking lots of questions. Glad to find a place to get some answers.

          Comment


          • #6
            we all are full of answers...

            Comment


            • #7
              and some of them are even correct..
              Pro-Tech Powder Coating
              93976 Ocean Way
              541-247-8168
              [email protected]
              Gold Beach,Oregon

              Comment


              • #8
                Originally posted by Blademan
                and some of them are even correct..

                Comment

                Working...
                X