Announcement

Collapse
No announcement yet.

Oven Building Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • getastro
    replied
    Oven Building Question

    Thanks, after looking into all the items I am going with the metal. Found a local shop with 2x4 tube, just need around 100 feet.

    Dale just wanted to know where you got your relay(s) at and do you use 1 or 2 pole relays?

    Leave a comment:


  • DALE
    replied
    Use metal, and when you put in the insulation try not to pack it in the more you compress it the lower the R-factor goes.Insulation is designed to have air pockets in it.This is if you are useing fiberglass which is the cheapest I have found with high R-factors.

    Leave a comment:


  • getastro
    started a topic Oven Building Question

    Oven Building Question

    Okay, I am building an oven and have a local place cutting the sheet metal for the inside and out. Question is what is the best thing to use for the frame between the inside and outside. Metal, Wood, stuffed full of insulation? Just not sure and do not want to spend alot on the frame work.
Working...
X