Announcement

Collapse
No announcement yet.

Oven im going to stat building soon.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JayP
    replied
    ZLogan2000,
    I have been looking at the guns as well and have decided I'm going with the hyper smooth 2.0 basic. A little over your budget but will suite my needs well.
    Jay

    Leave a comment:


  • JulianKLaJohnston
    replied
    Originally posted by Marmontes View Post

    What do you need them for? Probably easier to order than to buy
    Construction clamping scaffolds are temporary structures that are assembled on the construction site both outside and inside the building. Preference is still given to external works, because the clamping scaffolding has a universal fixing structure. Clamps fix the main elements and allow changing and adjusting the height of tiers, the width of the scaffolding step petesuen.com and its decking. Rungs, handrails and safety nets are used as standard to protect workers. I don't have those, and I can't build with boards. I need to paint the house and install exterior electricity (lamps, light fixtures)
    Last edited by JulianKLaJohnston; 05-16-2021, 08:15 PM.

    Leave a comment:


  • Marmontes
    replied
    Originally posted by JulianKLaJohnston View Post
    Yard repairs interest me, too. And how do you deal with heights? I found scaffolding services, is it worth ordering?
    What do you need them for? Probably easier to order than to buy

    Leave a comment:


  • JulianKLaJohnston
    replied
    Yard repairs interest me, too. And how do you deal with heights? I found scaffolding services, is it worth ordering?

    Leave a comment:


  • ZLogan2000
    started a topic Oven im going to stat building soon.

    Oven im going to stat building soon.

    Hi. I am brand new to powder coating and want to start so I can coat stuff on my motorcycle and around my house also I want to start a small business. the oven size I want to build is 4x4x6.5, I did the math and the interior dimentions are about 3.6x3.6x6 so the inside cf should be about 77cf. In my research I learned that you want 100-150 watts per cf. I am planning on putting 3 3000 watt elements in to total up to 9000 watts, will this be sufficient? and how long approximately will that take to heat up? So I need ideas on what to put in the oven.. I am planning on putting a fan, 2-3 lights, and I small door on the big door to look through and to take IR temps. are there more features that would make the oven better?

    So one of my big questions is what do I have to do to the oven to make it up to code in case I want to start a legal pc business? like does it have to have vents? special insulation? certain types of fans or X amout of space around the elements? idk what has to actually happen but those are some of my guesses.

    Right now am looking at about $1200-1300 for the oven but I can go up to about $1500-1600 if need be. I have not started saving for this oven yet so it will be a few months before I start construction anyway.

    So one of my last questions is what type of gun should I start with? I don't want a huge rolley cart run, I want a small cup fed gun. I looked at Eastwoods gun but I feel I would outgrow that really fast, so I want to go slightly bigger and more Pro, I want at lease 50Kv. Also I want to spend about $300-350 max thanks!


    Thank you so much for any help to anyone!!
Working...
X