Hi
I have a 24v ac damper and i want to control it with my partlow controler. one question, do i wire the 24v supply to the realys then the relays to the damper? it has 2 relays with n/c -- c-- n/o on each one. its model 1167 . my oven got up to 525 degrees and i shut it down, if i run it and open the door about a quarter of the way it seems to level off at 410 to 420 i'm wondering if the damper will work to let the heat out. it is 12 inch in diamiter.
Thanks for all your help
Joe
Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!
We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register? Just click the Register Link above.
You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.