oven pics

[edwardpic]

sorry took so long, have been swamped here at the shop, and have been filming a TV show that will air on speed channel. hope these work had to resize them to post here

[edwardpic]

Re: oven pics

hope these work too

[edwardpic]

Re: oven pics

ok maybe a little larger photo's...bear with me guys

[edwardpic]

Re: oven pics

more ok this should do for now...till i can get more

[edwardpic]

Re: oven pics

controller and the fan system---it draws from the top ducted down the back of the oven and then enters at the bottom for a pretty even air flow...fan is 315 CFM and im thinking of adding another

[planebuilder]

Re: oven pics

Excellent work!!! I noticed the controller, I assume it's a PID. Can you program ramp, soak , shutdown etc.
Could you list details/sources for the controller, SSR, switch.
Thanks

[edwardpic]

Re: oven pics

Thanks, we are building a bigger one and will be seilling that one. Yes the controller is PID and can be programmed to do many things, although basic target temperature and current temp is all thats really needed least in our case. Below is a list of parts-prices etc for most of the parts used except for the steel and wire.

McMaster-Carr parts below

Enclosure 18x18x8
75065k43
60.82

Contactor 240V 3-pole
6564k83
55.26

Main disconnect Panel Mount
6759k233
53.48

Power Distribution Block
7626k33
37.02

Thermostat
Digital
38615k11
188.42

Dial-IF DIDGITAL IS NOT WANTED
33215k22
92.12 connector # 7122k19 4.20 needed for operation

Thermo coupler
Type J
3871k91
37.22

Mineral wool
#9328K43

Gasket
#8815K42

Fan from Grainer
4MH08
__________________________________________________ ________
Cheaper PID controller can be bought here
http://auberins.com/


Hope that info helps-took me awhile tp make the pics smaller to post here!!!