Announcement

Collapse
No announcement yet.

Need pot metal plated

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ashcroft01
    replied
    Re: Need pot metal plated

    Monte,
    If you are still following this thread, I am interested in seeing these pieces. Are they indeed made of pot metal or are they pewter or Britannia metal?
    Either way, my shop has that capability to re-brass or Silver the pieces that you need done. We specialize in antique restorations and repair.
    Feel free to contact me at [email protected] if you need any additional information.
    Thanks and best of luck,
    Curtis

    Leave a comment:


  • perfectmetal
    replied
    Re: Need pot metal plated

    Hi, we are perfect metal polishing located in Nj, we do all kinds of plating, polishing and restoration. Our website is under construction, sorry! we can do the job for you, at a fraction of the price that others will quote you. We guarantee our work for a few months also. If you have any questions feel free to ask them. We do a lot of mail orders, so don't worry about that! we insure everything

    [email protected]

    Leave a comment:


  • monte
    started a topic Need pot metal plated

    Need pot metal plated

    I would like to have some suggestions as to where I could send a clock bezel from a Schatz ship's clock to be re-plated with brass. It is about 6 inches outside diameter, about 5.25 inches inside diameter and about .75 inch thick. There is a smaller, inside ring, that it closes onto that would have to be plated, maybe. It would depend on the cost. And I have about 3 to 4 to be done, and more in the future.
    If it would help, I could post some pics of the project.
    Any suggestions would be appreciated.
    I am located in Austin, Texas.
    Thanks,
    Monte Reese
Working...
X